Attribute | Attribute Value |
---|---|
Manufacturer | Microchip Technology |
Product Category | Microcontrollers |
Series | dsPIC™ 33F |
Packaging | Tape & Reel (TR) Alternate Packaging |
Package-Case | 64-TQFP |
Operating-Temperature | -40°C ~ 85°C (TA) |
Supplier-Device-Package | 64-TQFP (10x10) |
Number-of-I-O | 58 I/O |
Speed | 50 MIPs |
EEPROM-Size | - |
Core-Processor | dsPIC |
RAM-Size | 9K x 8 |
Program Memory | FLASH |
Peripherals | Brown-out Detect/Reset, DMA, QEI, POR, PWM, WDT |
Connectivity | CAN, I2C, IrDA, LIN, SPI, UART/USART, USB |
Voltage-Supply-Vcc-Vdd | 3 V ~ 3.6 V |
Core-Size | 16-Bit |
Program-Memory-Size | 64KB (64K x 8) |
Data-Converters | A/D 16x10b; D/A 1x10b |
Oscillator-Type | Internal |
The dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610 families of devices contain extensive Digital Signal Processor (DSP) functionality with a high-performance 16-bit microcontroller (MCU) architecture.
• 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIP
• Code-Efficient (C and Assembly) Architecture
• Two 40-Bit Wide Accumulators
• Single-Cycle (MAC/MPY) with Dual Data Fetch
• Single-Cycle Mixed-Sign MUL plus Hardware Divide
• 32-Bit Multiply Support
• ±1% Internal Oscillator
• Programmable PLLs and Oscillator Clock Sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast Wake-up and Start-up
• Low-Power Management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.7 mA/MHz Dynamic Current (typical)
• 50 µA IPD Current (typical)
• Up to 9 PWM Pairs with Independent Timing
• Dead Time for Rising and Falling Edges
• 1.04 ns PWM Resolution
• PWM Support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
• Programmable Fault Inputs
• Flexible Trigger Configurations for ADC Conversions
• High-Speed ADC module:
- 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps)
- Up to 24 input channels grouped into 12 conversion pairs plus two voltage reference monitoring inputs
- Dedicated result buffer for each analog channel
• Flexible and Independent ADC Trigger Sources
• Up to 4 High-Speed Comparators with Direct Connection to the PWM module:
- 10-bit Digital-to-Analog Converter (DAC) for each comparator
- DAC reference output
- Programmable references with 1024 voltage points
• Six General Purpose Timers:
- Five 16-bit and up to two 32-bit timers/counters
• Four Output Compare (OC) modules Configurable as Timers/Counters
• Quadrature Encoder Interface (QEI) module Configurable as Timer/Counter
• Four Input Capture (IC) modules
• Two UART modules (12.5 Mbps):
- With support for LIN/J2602 2.0 protocols and IrDA®
• Two 4-wire SPI modules (15 Mbps)
• ECAN™ module (1 Mbaud) CAN 2.0B Support
• Two I2C™ modules (up to 1 Mbaud) with SMBus Support
• 4-Channel DMA with User-Selectable Priority Arbitration
• UART, SPI, ECAN™, IC, OC and Timers
• Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 6 mA on 66 Pins
• 5V Tolerant Pins
• Selectable Open-Drain and Pull-ups
• 29 External Interrupts
• AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
• Class B Safety Library, IEC 60730, VDE Certified
• In-Circuit and In-Application Programming
• Two Program and two Complex Data Breakpoints
• IEEE 1149.2 Compatible (JTAG) Boundary Scan
• Trace and Run-Time Watch
Who we are?
is a professional electronic marketing corporation entirely engaged in the fields of semi-conductors and electronic components sale and service for clients over 10 years, specialize in selling the ne and unused, original factory sealed packing electronic components. specialize in IC,diode,transistor,IGBT,DC-DC converter.....***has set up our own sales service conception and has already established strong partnerships with many famous manufacturers and we have more than 5,000,000 kinds of electronic components for your choices, always at your services !
FAQ
Q: Are you trading company or manufacturer?
A: We are original manufacturer OF Integrated Circuit Chip . We can do OEM/ODM business.
Q: How long is your delivery time?
A: Group buying delivery time: 30-60 days; General delivery time: 20 days.
Q: What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
Q: How to buy your products?
A: You can buy the products from our company directly.Normally the procedure is sign the contract, payment by T/T,Contact the shipping company to delivery the goods to your country.
Q: What is the warranty ?
A: The free warranty is one year from the day of Commissioning qualified.If there is any fault for our products within the free warranty period, we will repair it and change the fault assembly for free
Contact Us at Any Time